The HDW-700A is a HD CAM Digital High Definition Camcorder utilizing Sony's 2 million-pixel PowerHAD™ Frame-Interline Transfer (FIT) CCD imagers and 10-Bit 74.25MHz DSP processing of the RGB video. The camcorder was designed as a one-piece, highly mobile and robust field acquisition system. The HDW-700A is supported by the HDW-500 studio VTR to create a highly versatile HD editing and post production system. The camcorder uses Sony's BCT series HD half-inch Metal Particle Tape. The standard small cassette allows 40 minutes recording time.
- Full-sampling 2/3" CCD 996 Mb/sec transfer rate (at an 8-bit bandwidth)
- Three optical pre-filters plus sample-and-hold circuit and low-pass output filter
- Nearly identical vertical and horizontal response
- Compact, 17 lb design
- Low power consumption
- Six "Shadow Quantizers"
- Memory chip "setup card"
|
(click to enlarge images)
 |
Dimensions:
H x W x D: 5.52 x 10.44 x 7.83 inches (140 x 265 x 340mm)
Weight:
Approx. 16.53 lbs. (8.0kg)
(Operating weight with lens, cassette and battery)
Power Requirements:
DC 12V +5.0/-1.0V
Power Consumption:
Approx. 40W
Operating Temperature:
32°F to 104°F (0°C to 40°C)
Storage Temperature:
-4°F to 140°F (-20°C to 60°C)
Humidity:
25 to 85% (relative humidity)
Continuous Operating Time:
Approx. 120 min. (with one BP-L90), or 80 min. (with one BP-L60)
Sensitivity:
F 8.0 at 2000Lux
S/N Ratio:
54dB unweighted measured over 30Mhz bandwidth
Inputs/Outputs-
Genlock Video Input:
BNC
Time Code Input:
BNC
Time Code Output:
BNC
Monitor Out:
BNC x 3
Camera Mic In:
XLR 3-pin
Mic/Line In:
XLR 3-pin x2
Audio Monitor Out:
XLR 3 pin
Earphone Out:
Mini jack
Lens:
12-pin
Remote:
8-pin
DC Input:
XLR 4-pin
DC Output:
4-pin
|
HDW-700A Instruction Manual 